Publicité
Les langues disponibles
Les langues disponibles
Installation requirements
Risk of injury or damage to property due to improper installation.
Incorrect installation of the tumble dryer can lead to personal injury or damage to prop-
erty.
It is recommended that installation and commissioning be accomplished by Miele Ser-
vice or an authorized dealer.
In Massachusetts, installation must be performed by a licensed installer / gas fitter.
The tumble dryer must be installed in accordance with all relevant regulations and stan-
dards. Observe all local codes.
The dryer must only be operated in a room that has sufficient ventilation and which is
frost-free.
The tumble dryer must not be installed behind a closeable door or a sliding door. The
maximum opening angle of the tumble dryer door must not be limited by objects or doors.
It must be possible to fully open the tumble dryer door at any time.
Floor anchoring
Secure the two screw feet at the front of the tumble dryer to the floor with the tensioning
straps supplied.
Optional accessories
Only use genuine Miele spare parts and accessories with this machine.
Using parts or accessories from other manufacturers may void the warranty, and Miele
cannot accept liability.
Communication box
The optional communication box allows external hardware from Miele and other suppliers
to be connected to the Miele Professional machine. External hardware includes e.g., peak-
load systems, pressure sensors, or an external vent flap.
The communication box is supplied with voltage by the Miele Professional machine.
The separately available set consists of the communication box and fasteners for installa-
tion on the machine or on the wall.
XKM 3200 WL PLT
The optional Miele communication module can be used to establish a data connection be-
tween a Miele Professional machine and a data processor in accordance with the Ethernet
or WiFi standard.
This communication module fits into the communication slot which is a standard feature on
all machines. The communication module offers the option of intelligent app-based com-
munication with external systems. In addition, it can display detailed machine and program
status information.
This module forms the basis for wired communication with Miele MOVE.
It is not possible to integrate the machine into the "Miele@home" app for domestic in-
stallations.
en - Installation notes
3
Publicité
