Problems And Solutions - T-Fal FILTRA ONE Guide De L'utilisateur

TF_FRYERS_FILTRAONE_NC00026838-02_Mise en page 1 05/06/12 10:19 Page13

Problems and solutions

Problems and possible causes
The appliance is not plugged in.
The oil/fat has deteriorated.
The oil/fat is unsuitable.
The lid is not closed properly.
Food is wet or contains too much water
(frozen food).
Different types of oil have been mixed.
Vision through the viewing window is not clear.
The Max. marker for filling the bowl has
been exceeded.
The Max. marker for filling the bowl has
been exceeded.
The frying basket has been overfilled
with food.
Food is wet or contains too much water
(i.e. frozen food).
Wrong oil or different types of oil/fat
have been mixed.
Unsuitable oil/fat has been used.
The deep fryer does not work.
Plug in the appliance.
Unpleasant odors.
Replace the frying oil/fat (after 12 uses
max.), or more frequently depending on
the type of oil/fat used.
Use a good quality blended vegetable
oil/fat. (see p.8).
Steam escapes from around the lid.
Check that the lid is properly locked
closed.
Remove any ice and dry the food
thoroughly. Lower the basket slowly (see
p.9).
Empty and clean the bowl. Refill the bowl
with one type of oil.
Check the level (Max.) and remove the
excess of oil after the fryer is cool.
The frying oil overflows.
Check the level (Max.) and remove the
excess of oil after the fryer is cool.
Check that the basket is not too full.
Remove any ice and dry the food
thoroughly before frying.
Empty and clean the bowl. Refill the bowl
with one type of oil/fat.
Use a good quality blended vegetable
oil/fat (see p. 8).
Solutions
EN
13