Publicité
Les langues disponibles
Les langues disponibles
EN
22
CLEANING AND CARE
1.
Clean the ice basket and water tank frequently. When cleaning, unplug the
unit and remove the ice cubes. Use a diluted solution of water and vinegar
to clean the inside and the outside surfaceof the Ice maker. Do not spray Ice
maker with chemicals ordiluted agents such as acids, gasoline or oil. Rinse
thoroughlybefore starting.
2.
Keep ventilation openings in the appliance enclosure, or in thebuilt-in
structure, clear of obstruction. Do not use mechanical devices or other means
to accelerate the defrosting process, other than those recommended by the
manufacturer.
3.
Reuse the machine after being idled for a period of time, it may not have
enough water to pump for air retard, in this case, the water shortage indicator
"ADD WATER" will be on. Repress "POWER" button to restart the ice maker is
okay.
4.
To ensure the cleanness of ice, please change water for water reservoir at
least once one day. If do not use for a long time, please drain the water out
and clean it up.
5.
If the compressor takes a strike action for shortage water, fully water or
interruption of power supply, it will delay for 3mins to start up after restarted.
6.
When the machine is used again after a long time, please start the cleaning
function first. Purified water is recommended.
7.
The filter screen in the water tank must be cleaned regularly after disassembly
to prevent the water inlet from becoming clogged with deposits. To do this,
proceed as shown in the figure below. Remove the ice collection tray and the
filter sieve in the water tank for cleaning and reinsert the parts after cleaning.
Filter screen
Position of the filter sieve
Ice collection tray
Publicité
