Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
The remote control signal type
If the remote control signal type is set to WiFi (auto)
icon of the Touch Control has
in Settings, the icon may change from time to
changed even though I didn't
time depending on the condition of network or TV
change the setting.
connection.
The automatic screen turn off mode operates
automatically to extend the life cycle of batteries.
The automatic screen turn off time setting can be
The screen on the Touch
changed by selecting Settings, Remote Settings,
Control turns off continuously.
General Settings and Backlight Duration. The time
can be extended to a maximum of 3 minutes. (You
can select 1 minute, 2 minutes or 3 minutes.)
Upgraded software has been added on Samsung.
The arrow on the top right does
com. Access Settings and perform a software
not disappear.
upgrade to upgrade the software to the latest
version.
The capacitor type touch-sensor technology of the
The touch-screen function
remote does not respond to the touch of a fingermail
doesn't work.
or stylus. Touch the screen lightly with your finger.
The corresponding function will start with a beep.
To turn off the power of or reboot the remote, slide
I want to turn off the power.
up and remove the cover on the back of the remote,
insert the batteries again and close the cover.
24
092A]Touch control-01L03.indb 24
All manuals and user guides at all-guides.com
2010-05-27 오후 3:50:15
Publicité
