Remote Control Unit Basics
Battery Replacement
1. Remove the battery holder.
Take hold of the holder at position B and pull it
out to remove the battery by pushing position A in
the direction shown by the arrow.
2. Replace the battery.
Set a new battery properly with its (+) side facing
up as shown in the figure.
3. Insert the battery holder.
Push the battery holder back into its original posi¬
tion.
Battery Notes
Remove and dispose of an old battery immediately.
Battery Information:
• Battery type: Panasonic lithium battery (CR2025)
• Battery life: 6 months with normal use (at room temperature)
Caution:
ipigrgper use of the battery may cause overheating, an explosion or ignition, resulting in injury
lora fire. Battery leakage may damage the unit.
• Do not disassemble or short the battery. Do not throw a battery into a fire.
• Keep batteries out of the reach of children to avoid the risk of accidents.
Battery holder
Position A
Main Controls
o
©
©
©
©
Power Button-
SOURCE Button-
3*DSB Button-
Disc Up/Down Buttons
SPEANA/DIMMER Button
0MUTE Button
©Volume Control Buttons
© SEL Button
O Tune/Track Buttons
0 DISP Button
<D BAND Button
CQ-DFX99/DF88EUC