Panasonic CQ-DFX99EUC Manuel D'utilisation page 22

Clock Basics
The 12-hour system is used for the clock.
22
CQ-DFX99/DF88EUC
Initial Time
The [DISP](CLOCK) button will not work while the CD player or
CD changer is set to the scan play mode. Cancel the scan play
mode before pressing [DISP](CLOCK).
© Press [DISP](CLOCK).
"ADJUST" appears on the display.
© Press and hold [DISP](CLOCK) again
for more than 2 seconds. "12" blinks,
and the time setting mode is activated.
© Press
[V TUNE]
or
[A TUNE]
to set
the hour.
©Press [DISP](CLOCK) again to pro¬
ceed with the minutes setting.
(D
Press
[V TUNE]
or
[a TUNE]
to set
the minute.
Press
[v TUNE]
or
[a TUNE]
for
more than 0.5 seconds to change
numbers on the display in sequence.
©Once the time has been set, press
[DISPJ(CLOCK).
Time Reset
Press and hold [DI$P](CLOCK) for more than 2 seconds to acti¬
vate the time setting mode to reset the time. Then, repeat steps ©
to © above.
Clock Display
Press [DISP]{CLOCK) to change to the clock display as follows.
In Tuner Mode Broadcast station <—» Clock
In CD Mode Playing time
t
—* Clock —» Title
_1
In AUX Mode
"AUX IN" * Clock
When the power is turned off while the time is displayed, the
clock mode remains on. When [DISP] is pressed, the system
is turned off completely.
Note:
The power must be switched off before leaving the
car if it does not have an accessory.