Disc Title Input
One title per disc for up to 25 discs can be input and stored in the
unit memory.
Press
[SOURCE]
to change to the CD player or CD changer
mode. Play the disc whose title is to be input.
13
Only for CD changer control
© Press [DISP] to change to the title mode for the disc now play¬
ing as follows.
Disc/Track Number/Track Play Time-»CLOCK—>Title Mode
t_I
" ******** " appears if no title has been input.
(
2
) Press and hold [DISP](TITLE) for more than 2 seconds to
change to the disc mode. The disc No. starts blinking.
(3) Press [a
TUNE]
or [v
TUNE]
to select the disc whose title is
to be input, while the disc No. is blinking.
@ Press
[BAND]
to set the selected disc.
©Press and hold [DISP](TITLE) for more than 2 seconds and
confirm that the disc No. starts blinking again.
(6) Press and hold [DISPJ(TITLE) for more than 2 seconds again
to change to the title input mode, while the disc No. is blinking.
"_" appears on the display, and the 1st " _ "
blinks.
® Press
[a
TUNE]
or [
v
TUNE]
to select a character.
(D
Press [DISP](TITLE) to initiate the selection of the next character.
The next " _ " starts blinking.
(9) Repeat steps © and © for each of the remaining characters in the
title.
© Once all of the characters have been selected, press and hold
[DISP](TITLE) for more than 2 seconds until the display starts
blinking to store the title in the memory. The unit returns to the title
mode, and the title remains on the display.
iv/f
u n t cz r n rj
f 1
Jj
_f
U LJ
L-
19
CQDFX99/DF88EUC