Timer
Immediately after dialling a telephone number a call timer will be shown on the
display. The timer is a simple way to help you keep track of how long the call
lasts.
Hands free function
1. Press
. The speaker will be activated and the Hands free indicator light
s
will illuminate.
2. Dial the required telephone number. The speaker volume can be adjusted
using located on the side of the telephone.
3. Speak towards the microphone located on the front edge of the telephone.
4. Press
to terminate the call.
s
Please note!
During a conversation, you can switch from the hands free to handset mode at any time by
picking up the handset. Replace the handset to terminate the call.
Please remember that in hands free speaker mode it is only possible for one person at a time
to talk. The switch over between speaker and microphone is automatic and dependent on the
sound level of the incoming call and the microphone respectively. It is therefore essential that
there are no loud noises, e.g. music, in the immediate vicinity of the telephone, as this will
disrupt the speaker function.
Warning tone
A warning tone can be selected using the switch located on the back of the
unit, if the handset is then not replaced correctly an alarm will sound after 20
minutes.
www.doro.com
All manuals and user guides at all-guides.com
Operation
English