Publicité
Les langues disponibles
Les langues disponibles
Recall Time (Australia and New Zealand only)
Access to additional network services such as "Call Waiting" can be gained by
using the recall button
, listen for the dial tone, then press 2. Please note that some networks require
R
only the
button to be pressed, contact your network operator for more services
R
information.
If this product is connected to a business PBX system, press the recall button
followed by the extension number to transfer a call. The standard setting is 100 ms.
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in. Disconnect
any additional equipment, extension cords and other telephones. If the problem is
resolved, the fault is with the other equipment.
Test the equipment on a known working line. If the product works, then the fault
is probably with the line. Please inform your local telephone company.
No number shown in display when ringing
- In order for this feature to function, you must subscribe to the Caller
Identification service from your network provider.
- If a text message is shown on the display, the call may be an international call
(no data received), or from a private or withheld number.
- It may not be possible to receive Caller ID information if the phone operates
in a PBX system.
If the telephone still does not work, contact Doro or the place of purchase. Don't
forget the receipt or copy of the invoice will be required for guarantee purposes.
www.doro.com
All manuals and user guides at all-guides.com
Other
. Example: when the call waiting tones are heard, press
R
English
R
1
Publicité
