Swing Operation - Fujitsu Halcyon ASU30CLX1 Mode D'emploi

SWING OPERATION

Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button (Fig. 6 T).
The SWING Display (Fig. 7 b) will light.
Each time the SWING button is pressed, the swing operation will change in the
following order.
Up/down swing operation
Swing operation stops
To stop SWING Operation
Press the SWING button and select STOP .
Airfl ow direction will return to the setting before swing was begun.
About Swing Operation
● Up/down swing: Swing operation begins using the
following range according to the current airfl ow direc-
tion.
Airfl ow direction is 1–4 (for cooling, dry).
With the upper airfl ow-direction louver in the hori-
zontal position, the lower airfl ow-direction louver
moves (swings) to direct airfl ow to a wide area.
● Left/right swing: The airfl ow-direction louvers move
(swing) in the left/right airfl ow direction.
En-11
9315345363_OM.indb Sec1:11 9315345363_OM.indb Sec1:11
Left/right swing operation
Up/down/left/right swing operation
● Up/down/left/right swing: The airfl ow-direction louvers
● The SWING operation may stop temporarily when the
● If the SET button (Vertical) is pressed during the up/
move (swing) in both the up/down and left/right airfl ow
directions.
air conditioner's fan is not operating, or when operating
at very low speeds.
down swing operation, the up/down swing operation
will stop and if the SET button (Horizontal) is pressed
during the left/right swing operation, the left/right
swing operation will stop.
9/16/2010 2:48:51 PM 9/16/2010 2:48:51 PM