jbc ADVANCED Serie Mode D'emploi page 9

ENGLISH
MICRO HOT TWEEZERS PA 1200
For micro hot tweezers to work properly, the
following components are required:
- Control unit.
- Micro hot tweezers PA 1200 ref. 1200000. For
general precision desoldering with SMD
components.
Power: 40W.
Effective power per cartridge fitted: 20W.
- Stand PA 8100 ref. 0748100.
- A set of cartridges (see range).
Changing the cartridge
To extract the cartridge the screw needs to be
unfastened and the cartridge pulled out. Insert
the new cartridge and push it thoroughly. Then
check that both tips of the tweezers coincide
and screw it.
Important.
- It is essential to insert the cartridge till
the end for a good connection. Take the
mark as reference and check that both
parts of the tweezer coincide.
Alignment
All manuals and user guides at all-guides.com
8
RANGE OF CARTRIDGES
PA 1200 has an individual temperature control
for each cartridge so it is supplied individually.
1200 CHIP COMPONENTS
1200-002
1.5mm
ø0.2
1200-001
ø0.2
IC COMPONENTS
1200-003
3
PATENT PENDING
All the cartridges shown are actual size.
1200-004
1.5mm
ø0.7
1200-005
5