Publicité
Les langues disponibles
Les langues disponibles
Expanded system (+1)
�he call number for internal calls will be shown in
the display in standby mode. �he base unit should be
positioned centrally so that the coverage area is roughly
equal for all handsets.
Intercom / internal call
1. Press
(right menu button).
2. If using more than 2 handsets: Enter call number
for the desired handset or press
A tone will be heard if an external call comes in while an
internal call is in progress. End the internal call with
and then answer the external call with
Transferring calls/Conference between handsets
When an external call is connected;
1. Press
. Scroll to INTERCOM. Press OK.
2. If using more than 2 handsets: Enter call number
for the desired handset or press
3. �o transfer: press
L
pressed down.
Register a new handset
All handsets included in the package are already registered
to the base unit.
Only for separate handsets/service measures.
You can register up to 6 handsets to one base unit.
This model is GAP (Generic Access Profile) compatible,
which means that the handset and the base unit can both be
used with most other GAP compatible units irrespective of
manufacturer. However the GAP protocol cannot guarantee
that all functions may be accessed. Extra handsets will not be
available as accessories.
1. Hold down
on the base for around 6 seconds.
J
2. Press
. Scroll to REGISTRATION. Press OK.
3. Enter the base unit's PIN code (e.g. 0000). Press OK.
4. If the registration is successful the unit will return to
standby mode within one minute.
for all.
9
.
q
for all.
9
, �or conference: hold
English
Troubleshooting
Check that the telephone cord is undamaged and properly
plugged in. Disconnect any additional equipment,
extension cords and other phones. If the problem is
resolved, the fault is with some other equipment.
�est the equipment on a known working line (e.g. at a
neighbour's house). If the equipment works there the fault
is probably with your telephone line. Please report this to
-
1
6
your network operator.
No number shown when ringing
- �his function requires a Caller ID subscription from
your service provider.
L
Warning tone/Not possible to make calls
- �he batteries may be running low (charge the handset).
- �he hand unit may be nearly out of range. Move closer
to a base unit.
-
1
6
Telephone does not work
- Check that the adapter/phone cord is connected correctly.
*
- Check the charge status of the handset batteries.
- Connect another functioning telephone to the network
wall socket.
The telephone continues to ring
- Some of the telephone's ringers do not follow the line
signal, which means that the signal may continue for
up to 8 seconds after answering a call.
If the telephone still does not work, contact the place of
purchase for service. Don't forget the receipt or a copy of
the invoice.
Specific Absorption Rate (SAR)
�his device meets applicable international safety
requirements for exposure to radio waves. �his telephone
measures 0.05 W/kg (per 10g tissue). �he max. limit
according to WHO is 2W/kg (per 10g tissue).
Publicité
