Doro Arc 3 Mode D'emploi page 5

Phonebook
You can save 20 numbers/names. If you subscribe to a
caller ID service, the name allocated to the caller in the
phonebook will be shown for incoming calls. It is possible
to choose between various ringers for the numbers saved
in the Phonebook (only functions if you subscribe to a
caller ID service).
Letters
Each number key has been allocated certain letters. �he
phonebook is arranged according to the order of the
buttons, which is not the same for all languages.
.....................[Space]
1
Save name/number in handset
1. Press . Press .
b
2. Scroll to ADD. Press OK.
3. Press equivalent digit key several times for desired
name. Press OK.
4. Enter the telephone number, including the area code
Delete if necessary with right menu button
5. Scroll to required ringer. Press OK.
Managing the phonebook
1. Press
. Scroll between entries with
b
can quick search the phonebook by pressing the
corresponding number key for the first letter.
2. Press
to make a call or press
q
Incoming numbers/Caller ID
�he display shows you who is calling and the 10 most recent
missed calls. NEW CALLS will be shown in standby mode
and  in the list indicates a missed call. �his function
requires a subscription from your service provider!
Retrieving and dialling
1. Press
. Scroll to the desired entry with
{
2. Press
to call or press
q
( = back).
Caller identification messages
In addition to number display, the following messages will
be shown occasionally:
OUT OF AREA Unknown number, e.g. international call.
WITHHELD
Information about the number is blocked.
Number cannot be shown.
MSG indication from your network operator*
a
*Delete: Press and then hold down
{
. Press OK.
C
/ . You
{ }
for various options.
.
}
for various options
4.
English
Handset settings
1. Press . Scroll to HS SETTINGS. Press OK.
2. Scroll to desired function e.g. LANGUAGE. Press OK.
3. Scroll to desired setting. Press OK.
ALARM
RING SETUP
Melodies 2-5 can continue for up to 8 seconds if the call is
answered in another phone.
TONE SETUP
LANGUAGE
RENAME HS
HS DISPLAY
AUTO ANSWER �he call is answered when the handset
DATE & TIME
Base settings
System PIN is 0000 on delivery.
1. Press . Scroll to BS SETTINGS. Press OK.
2. Scroll to desired function. Press OK.
3. Enter the desired setting. Press OK.
DELETE HS
FLASH TIME
CHANGE PIN

When the alarm is activated
be shown in standby mode. When
the alarm goes off, a signal will be
heard for 45 seconds. �he signal can
be turned off with any button. If
SNOOZE is activated the alarm will
go off again approx. 7 minutes later.
�urn the alarm off permanently via
the menu or by holding
L
for a few seconds. �he volume is
determined by the set ringer level.
�he handset's ringer signal.
INT/EXT=internal/external melody.
RING VOLUME=set the ringer level.
Key tone, low battery tone, out of range.
�his is explained in the Connection
section.
�he text shown in standby mode.
Show name or time in standby mode.
is lifted from the base.
Setting the date/time.
�o deregister another handset.
LONG = New Zealand.
MEDIUM = �rance/Portugal.
SHORT = others incl. UK/AUS.
�he code (e.g. 0000) can be changed.
will
down