Faber GALILEO SMART BK F830 + KIT LL H80 Manuel D'utilisation page 14

Function
Pause + Restart
Recall Function
Bridge Function
Automatic pan
detection
function
Residual heat
indicator
14
This function freezes all the hob settings for approximately 10
minutes if the person using the hob needs to go away for a short
time.
During the pause:
- No energy is being used in any of the cooking areas.
- All the Timers are stopped.
- The "Turbo" and "Quick Heating" functions are deactivated
When the 10 minutes are up, the hob will continue with all the
actions that were set previously.
To activate: press and hold
indicate
To deactivate: press and hold
Press any other button within 10 seconds.
This function is used to recall all the hob function settings in the
event of involuntary shut-down or a sudden power cut.
When the hob is turned off, if it is not turned on again within 6
seconds using
the button to recover the functions set previously. A beep sounds
to confirm the operation.
With the hob turned off, if it is turned on again within 6 seconds
the previous function settings are recovered automatically.
This function allows 2 cooking areas to be connected, so that they
can be controlled as a single, large cooking area. This means it is
possible to use pans with a larger bottom.
To activate: with the hob turned on, simultaneously press the
required buttons to select the 2 areas to form a bridge, until a
Digit displays to indicate that the function has been activated.
The other Digit is used to set the power level.
Warning: The left cooking areas cannot be connected to the right
ones, and vice versa.
To deactivate: simultaneously press the buttons that have been
used to create the bridge, until the symbol
If a pan is placed on one of the cooking areas, the hob detects
it automatically and lights up the corresponding Digit at maximum
intensity, displaying
The residual heat indicator is a safety feature, indicating that the
surface of the cooking area is still at a temperature of 60° C or
above, which may cause burns if touched by a naked hand.
The Digit for the corresponding cooking area displays
for at least 1 second. All the Digits
for at least 1 second until it flashes.
, the button will flash for 6 seconds. Press
.
disappears.
.