Bergstrom Lite Instructions De Montage page 18

LITE
EN
CABLE CONNECTION
9 Run power cables to the hatch and secure the
supplied terminals on them, positioning the
supplied 2-way box.
Caution: Match the cables as indicated R= (+)
and N= (-).
! Caution: The cable to be installed must be 6 mm section; the (+) cable must be protected with a 30A
fuse.
Important: Due to the equipment's complex electronic regulation system, the current connection must
be made directly to the battery point or authorised connection point, and not to any other point which
services other accessories of the vehicle, taking the precaution to not invert polarity when making the
connection.
Important: Check the user manual for starting up.
9
18