Publicité
Les langues disponibles
Les langues disponibles
2
NOTE: The camera icon indicates video tutorials are available as additional reference, visit
EN
http://mynapoleon.napoleonproducts.com/download/index/44/1
1.0
GENERAL INFORMATION
2.0
INSTALLATION
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3.0
ADJUSTMENT
3.1
3.2
4.0
REPLACEMENTS
5.0
B81S OVERVIEW
NOTE: Changes, other than editorial, are denoted by a line in the margin.
1.0 GENERAL INFORMATION
This rock burner assembly is approved for use in the HD81-1 gas appliance only. It is not approved for use as
a stand alone appliance or in conjunction with any other appliance.
2.0 INSTALLATION
2.1
ACCESS PANEL
A.
Once either door is removed (refer to the "DOOR REMOVAL/INSTALLATION" section of the HD81-1
manual), remove the air manifold by removing the two retaining brackets located at the top of the
fi rebox, see Figure 1.
B.
Remove the valve access panel and gasket by removing the 8 screws, see Firgure 2.
Fig. 1
2.2
BURNER ASSEMBLY
A.
Attach the burner assembly to the fi rebox base
with the screws supplied, making sure the pilot
assembly is closest to the valve access opening.
W415-0808 / D / 11.04.16
TABLE OF CONTENTS
ACCESS PANEL
BURNER ASSEMBLY
BULKHEADS
NIGHT LIGHT™ INSTALLATION
PORCELAIN BASE INSTALLATION
BURNER COVER INSTALLATION
ROCK INSTALLATION
FLAME CHARACTERISTICS
VENTURI ADJUSTMENT
Fig. 2
BURNER
ASSEMBLY
2
2
2
2
3
3
4
4
5
6
6
6
6
7
PILOT
ASSEMBLY
Publicité
