5.5.
Extracting Steam
Danger of scalding and burning! The steam is very hot. Do not place your hand above the steam
outlet.
In order to extract steam, turn the steam control knob (1) positioned above the steam wand (3) to the
right. Steam streams out of the wand. Turn the steam knob to the left to close the steam wand.
Before and after using the steam wand for frothing milk, open it for 1 or 2 seconds in order to
clean off any discharges.
Clean the steam wand with a wet cloth after each usage.
6. Cleaning
Do not use jets of water to clean the espresso machine. Do not pour water onto the machine or
onto any of its attached components.
Before cleaning, let the machine cool down!
In areas which may be subject to infestation by cockroaches or other vermin, pay particular
attention to keeping the machine and its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the guarantee.
6.1.
Daily Cleaning
CLEANING OF FILTERS AND PORTA FILTERS
Add some detergent for coffee machines to hot water and bathe the filters and porta filters in the
water.
CLEANING OF THE MACHINE
Disconnect the machine from the electric mains supply before performing any kind of cleaning!
Let the machine cool down before performing any kind of cleaning!
Clean the screw driver of the porta filter and the groups with a humid cloth.
Carefully clean the water taps and the steam wands in order to avoid the building up of crust.
6.2.
Weekly Cleaning
CLEANING OF THE GROUPS
AUTOMATIC MODELS (CV Models)
These models feature an automatic cleaning
program.
Before starting the cleaning process, switch the machine
off.
1.
Put the filter holder supplied with the machine
into a porta filter.
2.
Insert the filter holder into the group that you
want to clean.
3.
With the machine switched off, simultaneously
press key 3 and the ON/OFF button to turn the machine
on. This combination starts the cleaning process.
4.
During the cleaning, the LEDs of both keys blink.
5.
When the cleaning is over, the Leds stop to blink.
The machine automatically returns to normal functioning
mode.
(Translated from original language) ENGLISH
SEMI-AUTOMATIC MODELS
1.
Put the blind filter supplied
with the machine into a filter holder.
2.
Insert the filter holder into the
group that you want to clean.
3.
Press the switch button above
the group you want to clean in order to
activate the group.
4.
Press the switch button above
the group in order to stop the group.
5.
Repeat this operation until the
water that comes out of the group is
clear and shows no signs of detergent.
6.
Take out the blind filter and put
a normal filter into the filter holder.
Insert the filter holder into the group.
Espresso Coffee Machine– Operating Manual
21