Publicité
Les langues disponibles
Les langues disponibles
Section 7 Menus and commands
Command
Response
?
print this help menu
A
start pressure-
activation
C
calibrate—battery,
current, vacuum
D
set data verbosity
E
execute (start)
mission
G
GPS module agent
G?
GPS module menu
H
LBT module agent
H?
LBT module menu
I
diagnostics agent
Connect with the serial 20 mA loop and enter ? at the c> prompt to use the available
commands. Note that commands are not case-sensitive: C and c are equivalent.
Show the help menu
Mission starts when float descends to programmed pressure activation value
Show battery voltage, current draw, vacuum. If values change there may be a problem.
0 = smallest amount of data
5 = largest amount of data (file may overflow)
recommended = 2
Mission starts immediately. Use this command only if you are ready to deploy the
float immediately
GPS tests for lab use, Gx
?—print menu
Ga—transmit almanac to GPS15L-W
Gc—configure the GPS15L-W
Gf—get GPS15L-W fix
Gl—log (save) NMEA sentences from GPS15L-W
Gt—synchronize the Npf clock with GPS
telemetry tests for lab use, Hx
?—print menu
Hb—LBT signal strength, bars
Hc—configure modem
Hd—dial, download mission, transmit files to configured host
Hf—query firmware version of modem
Hi—query IMEI number of modem
Hm—query model of modem
Hr—register the LBT with the Iridium system
Hs—query ICCID and MSISDN numbers of SIM card
diagnostics tests for lab use, Ix
Description
15
Publicité
