SUPAIR SORA EVO Notice D'utilisation page 37

User manual | SORA EVO
Brake line length
Brake line lengths are set in the factory to allow optimal glider
control. However, if the setting does not suit you, it is possible to
modify brake line length.
We advise you to use a fisherman's knot and to keep your length
changes to a minimum (approx 5cm at a time).
The height of the brake retaining strap is adjusted as follows :
- Undo the knot on the brake line and pull it out through the ring.
- Move the brake retaining strap to the desired position using the
straps on the riser and fix it with a loop.
- Feed the brake line through the ring.
- Connect the brake line with the handle on the mark with a fisher-
man's knot.
Be careful not to suppress the "bow" in the brake
line when flying hands up so that the canopy does not deform or
the trims cannot function correctly (if the trailing edge is pulled
tight).
The bow in the brake lines must be checked with trimmers fully
released. The trailing edge must not be affected in this position.
FR EN DE
sherman's knot
Brake strap
Margin
Connecting the glider
SUPAIR | SORA EVO | page 8