QSC CXD Serie Mode D'emploi page 20

HOME > OUTPUTS > SPKR PROC > LOAD SPKR > ENTER
Step 1 — Load an Existing Loudspeaker for the Selected Output
ABOUT
Speaker:
Crossover
EN
HOME > OUTPUTS > SPKR PROC > CROSSOVER > HIGH-PASS (
Step 1 — Set the Crossover High- and/or Low-pass filters
HPF
HOME > OUTPUTS > SPKR PROC > CROSSOVER > GAIN/POL > GAIN > ENTER
Step 2 — Set the Crossover Gain and Polarity
Gn/Pol
TD-000367-00-A
All manuals and user guides at all-guides.com
SPEAKERS
Output: A
WL2102 BiLFNS
2-Way LF
Band:
80 Hz
Filter:
CONFIRM
F1: A B C D
Freq Type
70.0 BWrth
F1: A B C D
Gain Polarity
-5.5 dB POL +
LOAD
Band and Filter
selections are
displayed and
constrained based
on the loudspeaker.
To Load the speaker profile to the selected output, press
LOW-PASS) > ENTER
OR
Output
Freq: 20 - 20 kHz
A
20 dB
Type:
• Butterworth
• Linkwitz-Riley,
• Bessel-Thomson
Slope:
-60 dB
6dB to 48dB/oct
Slope
depending on Type
24dB/oct
Output
A
20 dB
+
Gain -100 to +20 dB
–
Polarity + or -
-60 dB
20
To edit Speaker, press
Scroll to select Speaker model
To confirm, press
Scroll to (Band, Filter)
To adjust, press
Adjust selected parameter
To confirm, press
Scroll to LOAD
Scroll to select (Freq, Type, Slope)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to select (Gain or Polarity)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
EXIT
ENTER
ENTER
EXIT