Publicité
Les langues disponibles
Les langues disponibles
PART NUMBER: E771SFN100
STEP 21: Carefully and gently remove the two tape liner sections shown below. Pulling with too much force or too quickly can tear the tape liner. TIP: If the liner
tears, pull the same liner from the opposite direction. Then remove corner alignment templates.
STEP 22: Use a towel and apply firm pressure (approximately 15lbs of force) to the areas highlighted in yellow.
STEP 23: Inspect part for any areas not adhering to the bumper. Firmly pressed down as needed. Done.
ISSUE
SUBARU OF AMERICA
PART NUMBER: E771SFN100
10-20-2022
PAGE 9 / 9
01
Publicité
