Publicité
Les langues disponibles
Les langues disponibles
PART NUMBER: E771SFN100
PREPARATION: Park vehicle in well lit area. Open rear gate. Unpack parts. Read the entire installation instruction prior to beginning.
STEP 1: Clean any dirt, oil or wax from attaching area of bumper with a clean cloth and rubbing alcohol. Then prepare the surface with the supplied alcohol pads.
STEP 2: Note: If the temperature is below 60°F (15°C), heat the double sided tape and bumper surface to a temperature of 80°F (27°C).
ISSUE
SUBARU OF AMERICA
10-20-2022
PAGE 2 / 9
PART NUMBER: E771SFN100
01
Publicité
