Publicité
Les langues disponibles
Les langues disponibles
PART NUMBER: E771SFN100
STEP 9: Gently pull the liner shown below by approximately 3" (76mm) BUT DO NOT PRESS DOWN.
3" (76mm)
STEP 10: Carefully inspect and align (if necessary) the side of the part to the bumper and then press down on the part by a finger's width only at the location shown
below. Do not press down anywhere else.
Only press here.
STEP 11: Carefully and gently remove the entire tape liner section shown below. Pulling with too much force or too quickly can tear the tape liner. TIP: If liner tears,
pull the other liner that is intact.
ISSUE
PART NUMBER: E771SFN100
SUBARU OF AMERICA
10-20-2022
PAGE 5 / 9
01
Publicité
