Nice spido Instructions Et Recommandations Pour L'installateur page 3

spido
Table of contents:
1 Product description
2 Installation
2.1 Preliminary checks
2.2 Typical system layout
2.3 Limits of use
2.4 Installing SPIDO
2.5 Adjusting the drive bar
2.6 Fitting the limit switch slides
3 Manual manoeuvre from the inside or release
Important information
Congratulations on choosing this Nice product. Please read this
handbook carefully.
To make these instructions easier to follow, we have, wherever possible,
put them in the order in which they will be carried out during the various
system installation phases.
Please read these instructions and the attached "Warnings for fitters" file
carefully before installing the product as they contain important
information concerning safety, installation, use and maintenance.
Anything not expressly specified in these instructions is forbidden.
Operations not indicated in these instructions may cause damage to the
product, people and property.
All manuals and user guides at all-guides.com
page
2 4
2 5
2 5.1
2
3 6
3
3
3
4
Nice declines all liability for badly built sectional doors or any
deformations that may occur during use.
Do not install the product in explosive atmospheres.
This product has been designed and produced for automating well-
balanced doors that can be opened by hand; it must therefore be
possible to completely open the door using a force of less than 150N
(15kg) and stop it in any position; after it has been released it must not
descend. It is forbidden to touch any mechanical parts (chain, trolley,
pinion) while SPIDO is working.
Testing
Maintenance
Disposal
Technical specifications
Instructions and warnings for
users of the SPIDO gear motor
GB
page
4
4
4
4
5
1