Publicité
Les langues disponibles
Les langues disponibles
Expanded system (Two or more handsets e.g +1...)
�he call number for internal calls will be shown in the display in standby mode. �he base unit should be positioned
centrally so that the coverage area is roughly equal for all handsets.
Intercom / internal call
1. Press
(right menu button).
2. If using more than 2 handsets: Enter call number
A tone will be heard if an external call comes in while an internal call is in progress. End the internal call with
and then answer the external call with
Transferring calls/Conference between handsets
When an external call is connected;
1. Press
. Scroll to INTERCOM. Press OK.
2. If using more than 2 handsets: Enter call number
3. �o transfer: press
L
Register a new handset
All handsets included in the package are already registered to the base unit.
Only for separate handsets/service measures.
You can register up to 6 handsets to one base unit.
This model is GAP (Generic Access Profile) compatible, which means that the handset and the base unit can both
be used with most other GAP compatible units irrespective of manufacturer. However the GAP protocol cannot
guarantee that all functions may be accessed. Extra handsets will not be available as accessories.
1. Hold down
on the base unit until indicator flashes.
J
2. Press
. Scroll to REGISTRATION. Press OK.
3. Enter the base unit's PIN code (e.g. 0000). Press OK.
4. If the registration is successful the unit will return to standby mode within one minute.
All manuals and user guides at all-guides.com
.
q
, �or conference: hold
English
-
for the desired handset or press
1
6
-
for the desired handset or press
1
6
pressed down.
*
for all.
9
L
for all.
9
Publicité
