Publicité
Les langues disponibles
Les langues disponibles
ADDITIONAL REMOTE
FEATURES:
•
This power base uses a Bluetooth
control system.
•
The included remote is already paired with
your power base, so should be operational
right out of the box. Please test some of the
features to ensure functionality.
•
Only replacement remote controls require
pairing instruction on following pages.
If you find that your remote is not paired
with the bed, please follow those Bluetooth
pairing instructions.
NOTE: This power base may have minor
intermittent performance due to RF
Interference. This is a normal operation of
the power base and is not a defect.
•
The buttons are back-lit, when a button is
pressed, to aid the visibility of the remote in
low light environments.
•
Customers can control the remote without
facing the receiver (best transmission range
is within 30 feet or 10 meters)
•
The remote is equipped with a
lithium-ion battery that can be recharged
anytime with the included Micro USB wall
charger adapter.
•
Please fully charge your remote before
operating for the first time.
•
When remote is fully charged, the charging
symbol will disappear.
SAFETY:
•
If there is an overload weight condition on
the head or foot mechanism, the control unit
will automatically stop all functions.
All manuals and user guides at all-guides.com
Remote Control Operation Guide
•
remote
®
NOTICE:
The changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
REMOTE LOCKOUT FEATURE (D,M)
•
•
•
CUSTOMER SERVICE: 800-973-8374
CUSTOMERSERVICE@REVERIE.COM
18
The input transformer voltage is AC 120V
60 HZ, the output voltage is DC 36V 4.2A.
When there is a short circuit, a fuse on the
transformer will be blown in order to protect
the electrical equipment.
ATTENTION: When the above situation
occurs, the customer MUST seek
professional assistance.
We created the remote lockout feature to help
owners prevent unintended use of the base.
Activating Remote Lockout
At the same time, press and hold the
ZERO G and STOP buttons for 3 seconds.
The white LED will flash twice to indicate
activation. Pressing any buttons on the
remote while in lockout mode will result in
no movement from the power base.
Deactivating Remote Lockout
Same method, press and hold the ZERO
G and STOP buttons at the same time for
3 seconds. The white LED will flash twice
to indicate deactivation. The remote and
power base will work normally.
Publicité
