Horizon Fitness T202 Manuel Du Propriétaire page 13

ASSEMBLY STEP 3
HARDWARE FOR STEP 3
PART TYPE
A BOLT
6
1
DESCRIPTION QTY
M6X1.0PX15L 4
A
4
A
3.1 Open HARDWARE FOR STEP 3.
3.2 Attach LEFT SIDE of the CROSSBAR (6) to the
UPRIGHT MAST (1) loosely using
2 BOLTS (A).
3.3 Attach RIGHT SIDE of the CROSSBAR (6) to the
UPRIGHT MAST (4) loosely using
2 BOLTS (A).
NOTE: Do not fully tighten bolts until the end of
STEP 4.
13