Unit Description - BoomToneDJ Duo Roll LED Mode D'emploi

2- Unit Description

BUTTON:
1 MENU
2 UP
3 DOWN
4 ENTER
5 DMX input: For DMX512 link, use 3pin XLR plug cable to input DMX signal.
6 DMX output：For DMX512 link, use 3pin XLR plug cable to link the next unit.
7 Power input：Connect to supply mains power.
8 Power output: Connect the power to next unit.
9 Microphone：Receive music for the sound active.
NOTE:
(1)Whenever there is a button press, delay 2 seconds will automatically to save all
the parameters.
(2) In a period of time, if has not been buttons to press, the LED display will disappear.
Forward over the menu /Return to a layer of the menu
Increase parameters
Reduce parameters
Into the next layer menu
10