Klarstein 10030683 Mode D'emploi page 37

What? How?
Spillovers on the 1. Switch the power to the
touch controls. cooktop off.
2. Soak up the spill
3. Wipe the touch control area
with a clean damp sponge
or cloth.
4. Wipe the area completely
dry with a paper towel.
5. Switch the power to the
cooktop back on.
The cooktop No power.
cannot Be
turned on.
The touch The controls are locked.
controls are
unresponsive.
The touch There may be a slight film of
controls are water over the controls or you
difficult to may be using the tip of your fin-
operate. ger when touching the controls.
The glass is Rough-edged cookware.
being scratched. Unsuitable, abrasive scourer or
cleaning products being used.
Some pans This may be caused by the
make crackling construction of your cookwa-
or clicking re (layers of different metals
noises. vibrating differently).
All manuals and user guides at all-guides.com
Important!
The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you
wipe the touch control area
dry before turning the cooktop
back on.
Make sure the cooktop is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area.
If you've checked everything
and the problem persists, call a
qualified technician.
Unlock the controls. See section
'Using your ceramic cooktop'
for instructions.
Make sure the touch control
area is dry and use the ball of
your finger when touching the
controls.
Use cookware with flat and
smooth bases. See 'Choosing
the right cookware'. See 'Care
and cleaning'.
This is normal for cookware and
does not indicate a fault.
EN
37