Klarstein 10030683 Mode D'emploi page 28

EN
28
All manuals and user guides at all-guides.com
Notes
• After connect to electricity, when power on, the buzzer of hob beeps once, all
indicators light up for 1 second then go out.
• When the hob in Standby mode, if there is no practice within 1 minute, the hob will
auto turn off, with buzzer beeps once. You will need to start again at step 1. You
can modify the heat setting at any time during cooking.
Note: To turn on hob, press the ON/OFF control button and hold on for about 3
seconds; To turn it off, just need to press ON/OFF button again.
• The heat setting indicator of the selected zone will flash when adjusting. After
adjusting, the number in indicator will flash for 5 seconds and then stop flash, then
the setting has been confirmed.
To turn off hob
Touch heating zone selection control button, then turn
the cooking zone off by touching [+] or [-] control
1
button adjust heat setting to 0 level, which indicator
shows [-].
You can also turn the whole hob off by touching the
2
ON/OFF control button.
Beware of hot surfaces
After turn off, the letter [H] will show in the power setting indicator which cooking zone is
hot to touch. It will disappear when the surface has cooled down to a safe temperature.
It can also be used as an energy saving function if you want to heat further pans, use the
hotplate that is still hot. When in Standby mode, if the surface of cooking zone is hot to
touch, the letter [H] and [-] will show in its heat setting indicator alternately.
Note: It's suggested to plug out the power code from socket to save electricity, if the
hob not being used.