Publicité
Les langues disponibles
Les langues disponibles
How to avoid damage to the appliance
• Do not use the cooking area as a worktop or storage space.
• Please be careful the edges when moving pots and pans around.
• Do not have the cooking zones on with empty pans, or with no pots or pans on
them.
• Ceramic glass is very tough, and impervious to sharp temperature changes, but is
not unbreakable. It can be damaged if particularly hard or sharp objects fall on to
it.
• Be very cautious if using pots made of cast iron, or other pots with rough edges or
burrs. Moving these can cause scratches on glass.
• If sugar or a misture containing sugar falls onto a hot cooking zone and melts,
remove immediately, while still hot. If left to cool down, it may damage the surface
when removed.
• Keep objects or materials liable to melt away from the ceramic glass surface, for
example, plastic utensils, aluminum foil, or cooking wraps. If any other materials or
foodstuffs have melted on the ceramic glass surface, these should also be cleaned
away immediately.
INSTALLATION
Cut out the work surface according to the sizes shown in the drawing. For the purpose
of installation and use, a minimum of 5 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
work surface material to avoid larger deformation caused by the heat radiation from the
hotplate. As shown below:
L (mm)
W (mm)
288
520
All manuals and user guides at all-guides.com
H (mm)
D (mm)
A (mm)
52
48
265+5
B (mm)
X (mm)
495+5
50 min
EN
23
Publicité
