Ameriphone ER Mode D'emploi page 26

Advanced Operations
5. Every 60 seconds, you will be
asked to press any key on the
keypad to continue, otherwise
the ER will hang up.
C. If the ER User Subscribes to
Voice Mail Service
1. After the call is answered by
the Voice Mail Service, hang
up and call back immediately
(within 20 seconds).
2. Repeat calling 2 or 3 times
until you hear a voice
message from the ER saying,
"Please enter your Monitor
Access Code".
3. Enter the Monitor Access Code
on your keypad (the access
code is 123 unless it has been
changed). This turns on the
speakerphone of the
ER and allows you to listen in
and have a two-way
conversation.
4. Every 60 seconds, you will be
asked to press any key on the
All manuals and user guides at all-guides.com
keypad to continue; otherwise
the ER will hang up.
To Change Your Remote Audio
Monitoring Access Code
1. Press the PROG key.
2. Press 6. The ER will announce the
current monitor access code.
3. Enter a new, 3-digit access code
(Don't use the ( * ) or (#) keys)
E
N
G
L
I
S
H
23