Ameriphone ER Mode D'emploi page 11

Setting up Your ER
Connecting for Desk or Wall Mount
Figure 4 - Connecting the Components
Desktop Use
1. Connect the telephone line
cord and the handset cord
to the telephone as shown in
Figure 4.
2. Plug the AC adapter into an
electric outlet and into the
telephone as shown in
Figure 4.
3. Lift the handset and listen for
a dial tone.
The phone is ready to use.
Wall Mount
1. Pull the handset hook out as
shown in Figure 5 and
reverse its position so that the
hook points up and will hold
8
All manuals and user guides at all-guides.com
the handset when you hang up.
Figure 5 - Reversing the Hook
2. Insert the tabs of the phone
base into the slots in the
lower position of the base as
shown in Figure 6. Push the
phone base in and down
firmly until it snaps into
place.
Figure 6 - Phone Base for Wall
Mounting