Ameriphone ER Mode D'emploi page 22

Advanced Operations
Test the Remote Help
Pendant's Setting
1. Make sure the handset is in the
cradle
2. Press RESET and hold until
you hear the word "TEST".
3. Press the remote pendant
button. The ER unit will then
beep, letting you know that the
remote pendant has been
programmed correctly.
If you don't press the button,
TEST mode will be terminated
after 2 minutes.
All manuals and user guides at all-guides.com
4. Press any key on the phone to
exit TEST mode.
5. If the ER doesn't beep in Step
3, follow the directions in the
next section to re-program the
remote transmitter.
To Re-program the Remote
Help Pendant
1. With the handset in the cradle,
press the RESET button on the
ER unit and hold the button until
you hear the word "LEARN."
E
N
G
L
I
S
H
19