Ameriphone ER Mode D'emploi page 10

Setting up Your ER
There are five steps involved in
setting up your ER.
• Insert four AA NICAD batteries
for back-up in case of AC
power outage.
• Decide if you want the phone
to sit on a desk or hang on the
wall.
• Connect the telephone
components.
• Program up to 12 telephone
numbers into the memory
buttons.
• Setup special features
Installing the Backup Batteries
If there is a power outage, the ER
will operate for 4-8 hours with
four AA NiCad back-up batteries
(not included).
Insert
batteries
here
Press in
here
to open
battery
compart-
ment
Figure 3 - Accessing the Battery
All manuals and user guides at all-guides.com
To install new battery:
1.Slide open the battery
compartment cover on the
bottom of the telephone
(Figure 3).
2. Install four fresh batteries. Be
sure to observe battery
polarity as imprinted on the
base of the compartment.
The low battery
indicator will
light up if the
batteries are
running low.
The phone operates as a regular
phone if there is no power
or battery.
Setting the Dialing Mode
Set the dial mode switch to T (tone) if
you have touch tone service. Set the
switch to P (pulse) if you have rotary
dialing.
E
N
G
L
I
S
H
7