Ameriphone ER Mode D'emploi page 18

Basic Operations
message. Pager number and
message number can be up to 31
digits long, including the # keys.
The pager numbers can be
programmed by following the
procedures below.
1. Press the PROG button.
2 Press the 1 key.
3. Press the desired memory
button.
4. Press the # key, followed by the
contact pager number and the
# key again, followed by your
home number and the # key
again.
5. For toll-free pager numbers that
use a pin number, follow this
procedure: Press the # key,
followed by the toll-free pager
number and the # key again,
followed by the pin number
and the # key again,
followed by your home phone
number and the # key again.
Here's an example:
#18007598355#4541
#7148970808#
6. Press the PROG button to store
the number
All manuals and user guides at all-guides.com
To Make an Emergency Call
Using the Phone
1. Press the red EMERGENCY
button. Your ER phone will
automatically dial your
emergency contact numbers.
To Make an Emergency Call
Using the Remote Help
Pendant
1. Press the button on the remote
pendant.
2. Your phone will begin automatically
dialing your emergency contacts.
NOTE: Please make sure you have
tested your Remote Help Pendant.
See ADVANCED OPERATIONS.
E
N
G
L
I
S
H
15