Télécharger Imprimer la page

Samsung HW-H430 Mode D'emploi page 18

Masquer les pouces Voir aussi pour HW-H430:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
functions
• Connect USB devices directly to the USB port of the product. Otherwise, you may encounter a USB
compatibility problem.
• Do not connect multiple storage devices to the product via a multi-card reader. It may not operate
properly.
• Digital camera PTP protocols are not supported.
• Do not remove the USB device while it is being read.
• DRM-protected music files (MP3, WMA) from a commercial web site will not be played.
• External HDDs are not supported.
• Mobile phone devices are not supported.
• File Format Type Compatibility list:
Format
*.mp3
*.wma
*.aac
*.wav
*.Ogg
*.Flac
If there are too many folders and files stored in the USB device, reading may take some time.
SOFTWARE UPGRADE
Samsung may offer upgrades for the Soundbar's
system firmware in the future.
If an upgrade is offered, you can upgrade the
firmware by connecting a USB drive with the
firmware upgrade stored on it to the USB port on
your Soundbar.
Note that if there are multiple upgrade files, you must
load them onto the USB drive singly and use them to
upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung
call center to receive more information about
downloading upgrade files.
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn
off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
Once upgrading the product software is completed, turn off the product and then press and hold (
while to reset the product.
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
Depending on the manufacturer, some USB devices may not be supported.
18
All manuals and user guides at all-guides.com
Codec
MPEG 1 Layer2
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
Wave_Format_MSAudio1
Wave_Format_MSAudio2
AAC
AAC-LC
HE-AAC
-
OGG 1.1.0
FLAC 1.1.0, FLAC 1.2.1
Sampling Rate
16KHz ~ 48KHz
16KHz ~ 96KHz
24KHz ~ 96KHz
16KHz ~ 48KHz
16KHz ~ 96KHz
) button for a

Publicité

loading