Kessel Minilift S Instructions D'installation Et D'utilisation page 31

4.5 Feeding out the mains cable
Feed the pump cable out of the system and clamp it in
the cable gland.
Insert the pump cable in the cable duct.
Connect the mains plug.
4.6 Fitting the cover
Grease the cover seal; use the enclosed grease.
Put on the cover.
To do so, guide the cover lugs at the back into the tank
groove and press in the cover all round with light pres-
sure, until the cover audibly latches into the tank.
Lock the locking device (on both sides).
016-307 31 / 116