Kessel Minilift S Instructions D'installation Et D'utilisation page 30

4.3 Installing the pump
Insert the pump in the tank.
Push the pump up to the outlet.
Lock the quick-release closure.
4.4 Check floater position (only versions with vertical floater)
Please check for correct floater position:
The floater can be used in two position, TOP and BOT-
TOM (TOP position is the factory setting).
Set the rotary controller to the relevant position according
to the positioning of the floater.
With the top position the maximum volume of the tank
can be used.
Switch-on level = 170 mm
The BOTTOM position is for use when connecting a
shower. Switch-on level = 85 mm
Changing the floater position
Tilt the floater forward slightly and click back into the
guide in Pos. A (top) or Pos. B (bottom).
Please be sure to use the top rotary disc to adjust the post
run time according to the floater position.
30 / 116 016-307