Télécharger Imprimer la page

Hotpoint Ariston OK 1037EL DP.20 X/HA Mode D'emploi page 27

Publicité

Les langues disponibles

Les langues disponibles

Start-up and use
! The first time you use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half and hour. Make sure
that the room is well ventilated before switching the
oven off and opening the oven door. The appliance
may emit a slightly unpleasant odour caused by
protective substances used during the
manufacturing process burning away.
! To make the setting process easier, press and
+
-
hold the
and
buttons to scroll through the
numbers on the display rapidly.
! Each setting will automatically be stored in the
appliance memory after 10 seconds.
! During operation, we recommend the removal of
any crockery or delicate foodstuffs from the cavities
not being used.
! Once cooking has begun, before the DIVIDER is
removed, the oven must be switched off using the
button.
! Every time the oven is switched on it is set to the
CREATION cooking mode.
! The touch controls cannot be activated if the user
is wearing gloves.
Control panel/door lock
! The door and control panel can be locked while the
oven is off, once cooking has started or finished and
during programming.
To lock the door and the oven controls, press and
hold the
button for at least 2 seconds. A buzzer
will sound and the TEMPERATURE display shows
the key symbol "O—n". The
indicate lock activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.
! When cleaning the appliance, the door lock may be
closed accidentally (there is an exposed spring). If
this happens, reopen it by turning the door lock
upwards (see figure).
KO
KO
OK
OK
All manuals and user guides at all-guides.com
Setting the clock
! The clock can only be set when the oven is
switched off. If the oven is in standby mode,
pressing the
time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
TIME display will flash for 10 seconds.
To set the clock:
1. Press button
2. Adjust the hour figure using the
3. Once you have reached the correct hour value,
press the
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the
clock. If the
indicates that the clock has not been set correctly.
Setting the minute minder
! The minute minder may be set regardless of
whether the oven is switched on or off. It does not
switch the oven on or off.
When the set time has elapsed, the minute minder
emits a buzzer that will automatically stop after 30
seconds or when any active button on the control
panel is pressed.
To adjust the minute minder, proceed as follows:
1. Press button
2. Set the desired time using buttons
3. Once you have reached the desired value, press
the
The lit
minder is on.
icon will light up to
To cancel the minute minder, press the
and use the
00:00. Press the
The
minute minder has been disabled.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between
the control panel and the oven door, as well as
towards the bottom of the oven door. At the
beginning of the FAST CLEAN mode, the cooling fan
operates at low speed.
button once will display the current
button and the digits on the
.
button.
icon flashes on the display, this
.
button again.
symbol will remind you that the minute
+
and
buttons to set the time to
button again.
icon will switch off to indicate that the
GB
+
-
and
buttons.
+
-
and
.
button
27

Publicité

loading