Makita UM164D Manuel D'instructions page 9

ENGLISH (Original Instructions)
1. Battery cartridge
2. Button
3. Lock-off button
4. Switch trigger
5. Indication lamp
6. Change lever
7. Protrusion on base frame
8. Base frame
9. Shear blades
10. Blade cover
11. Groove
12. Undercover
13. Locking lever
14. Press
15. Turn
16. Shear blade
17. Crank
SPECIFICATIONS
Effective cutting width
Stroke per minute (min
Dimensions (L x W x H)
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.......Take particular care and attention.
.......Read instruction manual.
.......Danger; be aware of thrown objects.
.......Keep bystanders away.
.......Cutting means continues to run after the motor
is switched off.
.......Do not expose to moisture.
Intended use
The tool is intended for cutting lawn edges or sprouts.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
All manuals and user guides at all-guides.com
Explanation of general view
18. Basic alignment line on the tool
housing
19. Pins
20. Recessed part of crank
21. Apply grease.
22. Base plate
23. Hole in the base plate of shear
blades
24. Oval holes that are overlapped
25. Groove in the undercover
26. Brush
27. Machine oil
28. Hedge shear blade
29. Hedge shear blade cover
30. Storage case
31. Bent part of the base plate of
shear blades
Model
-1
)
END010-1
ENE015-1
GEA010-1
32. Screws
33. Grass shear blade cover
34. Grass shear blade
35. Trimming direction
36. Tilt the blades
37. Hedge surface to be trimmed
38. String
39. Clamping nuts
40. Chip receiver
41. Screws on the shear blades
42. Blade cover to be always installed
before installing the chip receiver
43. Hook hole
UM164D
160 mm
1,250
292 mm x 178 mm x 130 mm
1.1 kg
D.C. 10.8 V
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
SAFETY INSTRUCTIONS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
General instructions
1. To ensure correct operation, user has to read this
instruction manual to make himself familiar with the
handling of the equipment. Users insufficiently
informed will risk danger to themselves as well as
others due to improper handling.
2. Never allow people unfamiliar with these instructions,
people (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge to use the equipment. Local
regulations can restrict the age of the operator.
GEB070-1
9