MINN KOTA CORDED FOOT PEDAL Manuel Du Propriétaire page 3

INSTALLING THE ULTERRA & RIPTIDE ULTERRA FOOT PEDAL
Your new Ulterra Foot Pedal accessory comes with everything you'll need to directly install it on your trolling motor. These instructions
are intended to show how to install your new Ulterra Foot Pedal on an Ulterra or Riptide Ulterra trolling motor. Please review the parts list
and mounting considerations for installation prior to getting started. For additional product support, please visit minnkotamotors.com.
INSTALLATION PARTS LIST
Item /
Part # Description
Assembly
A 2994743A FT PEDAL ASM, ULT 1.5 ACC
B 2994859 BAG, ASY-TERROVA/V2, RUB BUMPERS
2 2325110 PAD, FOOT PEDAL
p
2207117 INSTRC. SHEET, ULT. FT. ACC.
p
Not shown on Parts Diagram.
MOUNTING CONSIDERATIONS
When placing the Ulterra Foot Pedal on your boat, select a location that will not obstruct boat operation and that is appropriate for
trolling motor operation. Place the Ulterra Foot Pedal in a foot pedal well on your boat if it has one, or any location where it will be free
from water and debris.
©2021 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
Qty.
1
1
5
1
A A
B B
2 2
minnkotamotors.com | 3