Choose setup
option
OPTION 1: Basic setup
EN
Choose Basic setup for printing on a local network or USB connection.
OPÇÃO 1: Configuração básica
PT
Escolha a Configuração básica para imprimir em uma rede local ou conexão USB.
OPCIÓN 1: Configuración básica
ES
Elija la configuración básica para imprimir en una red local o conexión USB.
1.
EN
Choose Ethernet or USB:
Ethernet
i.
ii.
USB
i.
ii.
2.
Install printer software.
i.
ii.
4
Escolher opção de
configuração
Connect an Ethernet cable from the printer to the same network as
the computer.
Press "OK" on the control panel to confirm the IP address, then press "OK"
again until the printer displays "Ready."
Connect the USB cable to the port on the back of the printer and to
the computer.
Press "OK" on the control panel until the printer displays "Ready."
Go to hpsmart.com/download to download the HP software and print drivers.
Install the software and complete setup.
Elección del tipo
de configuración