Publicité
4 Scope of delivery
No.
Component
1
Control unit
2
Display
3
Bracket
4
Communication cable
5
Screw
5 Intended use
The battery monitor is intended to measure the current information about the battery charging and discharging cur-
rent from a 12 V LifePO4.
The battery monitor is not intended to be used with AGM, Gel and Wet batteries.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor in-
stallation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
1
5
4
3
2
Quantity
EN
1
1
1
1
4
7
Publicité
