Publicité
No.
Component
1
Display
2
Control unit
3
House battery
4
Solar charge controller
5
Additional 12 V devices/inverter/battery charger
Connecting two or more house batteries to the battery monitor
NOTICE! Damage hazard
• Ensure the maximal supported power and currents will not be exceeded when connecting several
batteries to the battery monitor (see
• If several batteries are connected to the battery monitor, they must have the same type designation,
have approximately the same age and have the same state of charge. The connecting cables must
be sufficiently dimensioned and should be kept as short as possible.
• Observe the manuals of the batteries.
• If a battery needs to be replaced, all battery must be replaced.
Technical data
on page 19).
EN
15
Publicité
