Publicité
Mounting the control unit
NOTICE! Damage hazard
Observe the rated voltage and the starting current of the connected devices at the positive pole for addi-
tionally 12 V devices (1,
1.
Remove the cover.
3.
2.
2.
2. Attach the lower part of the control unit to a suitable support (see
3. Connect the battery monitor (see
Technical description
on page 8).
1.
1.
Connecting the battery monitor
2.
1.
1.
4x
Ø 3 mm
Installation location
on page 10).
on page 14).
EN
1.
2.
3.
13
Publicité
