Costway BE10019 Mode D'emploi page 7

15.Installation of the Safety Belt: As shown in the figure, put the two ends of
the spare safety belt with iron ring through the holes on both sides of the seat
respectively, clip the polypropylene belt into the iron ring, and then clip the two
ends of the safety belt with plastic ring into the holes on both sides of the seat
for fastening.
16.Fix the Safety Belt: As shown in the figure, place the seat on the chair, fix
the safety belt behind the seat back to the back of the chair and fasten it. Then
fix the safety belts on both sides of the seat to the bottom of the chair and
fasten it.
12
Function Description of High Chair
17.8-Level Adjustment of the Chair Height: Pull up or down the outside
adjustment buttons to realize the 8 gears adjustment. 5-Level Adjustment of
the Chair Back: Hold the adjusting handle firmly and move up and down at the
same time to adjust the gear so as to realize the function of sitting, lying and
lying.
8-Level Adjustment
of the Height
15
18.Adjust the pedal angle in three gears. Press and hold the round buttons on
both sides of the pedal to adjust the pedal angle. The length of the foot pedal
can be adjusted in two gears. At the same time, press and hold the square
buttons on both sides of the foot pedal and pull outward to adjust the foot
pedal length.
3-Level Adjustment
of the Pedal Angle
16
5-Level Adjustment
of the Back
17
2-level Adjustment
of the Pedal Length
18
13