Publicité
Les langues disponibles
Les langues disponibles
3.Installation of the foot pedal: Align the left and right ends of the foot pedal
with the corresponding holes under the front end of the seat, and press until
you hear a "click" sound, which indicates that the installation is in place.
Click
a
4.Installation of seat installation: Adjust the seat back to a horizontal angle (as
shown in Figure a), and then clip the seat into the slot on the frame suspender
until you hear a "click" sound, which indicates that the installation is in place.
NO
a
06
b
OK
Click
b
5.Installation of the toy shelf: As shown in the figure, align the plastic tubes on
both sides of the toy shelf with the corresponding holes on both sides of the
seat and install them. You will hear a "click" sound, which indicates that the
installation is in place.
OK
Click
3
a
6.Installation of battery: as shown in the figure, use a slotted screwdriver to
pull the battery compartment cover under the front bracket outward and install
LR14(C)1.5Vx4 batteries (note the "+" and "-" poles), and then cover the
battery compartment cover.
4
a
b
Batteries: not included
+
-
+
-
+
-
+
-
LR14(C) 1. 5 V
LR14(C) 1. 5 V
LR14(C) 1. 5 V
LR14(C) 1. 5 V
*The picture is for
b
reference only, please
refer to the real object.
5
5V DC
6
07
Publicité
