Costway BE10019 Mode D'emploi page 5

Les langues disponibles

Function Description of Baby Swing

(when using the swing function, please use the product at level 7 or 8)

7.Five Gear Adjustments of the Backrest: Hold the adjusting handle firmly and

pull it up and down to adjust the gear. The toy rack can be adjusted back and

forth, and you can pull the toy shelf forward or backward to freely adjust the

gears.

5-Level Adjustment of the

Backrest

8.The angle of the pedal is adjusted in three gears. The upward adjustment

can directly pull the pedal up. For downward adjustment, press and hold the

round buttons on both sides of the pedal and then press down. The length of

the pedal is adjusted in two gears. Press and hold the square buttons on both

sides of the pedal, and press and pull outward to adjust the length.

Back and Forth

Adjustment of the

Toy Rack

3-Level Adjustment of the

2-level Adjustment of the

Pedal Angle

Pedal Length

9.Anti-sway Function: If children fall asleep or you do not want it to swing, turn

the boom to make the anti-sway button. Align the "

inside of the left and right upper boxes, and then push the anti-sway button

inward to stop the rocking of the rocking chair. In reverse, the rocking function

of the rocking chair can be restored by pushing the anti-rocking button

outward.

10.Folding Function: As shown in the figure, first adjust the foot to the lowest

angle and the backrest angle to the first gear. Hold the front bracket and press

the unlocking button(as shown in Fig. a). Then hold the folding button on the

horizontal tube of the rear bracket and pull it upwards to complete the folding.

Note: The actions

operation may result in failure to fold or damage to the folding structure.

Anti-Sway Function of the Swing

" arrow position on the

Fold the Chair

are carried out at the same time, and incorrect

Complete