Costway BE10019 Mode D'emploi page 6

Installation Instructions for Converting Baby Swing
to High Chair
11.Remove the Seat: As shown in the figure, while pressing down the buttons
on both sides of the seat, and then lift up the seat; Dismantle the Suspender:
Press the buttons on the left and right suspenders and pull them out in the
opposite direction to remove the suspender.
12.Installation of the High chair: Align both sides of the seat with the
corresponding slots on the inside of the left and right upper boxes and press
inward and downward until a "click" sound is heard, which indicates that the
chair is installed in place. Remove the toy shelf, and pull outward the
quick-release button to pull outward to remove the toy shelf. Align both ends of
the dining tray and install it into the chair hole until a "click" sound is heard,
which indicates that the chair is installed in place.
Click
10
Installation Instructions for Converting Baby Swing
or High Chair to Booster Seat
11
14.First, remove the seat from the baby swing or high chair, then turn the high
chair over and press the buttons on both sides of the footrest to pull out the
footrest.
Click
12
13.After the above operations
are completed, the baby swing
chair can be converted into a
high chair.
13
14
11